Ida Woods May/ 24/ 2019 | 0

There are a lot of steps involved in getting your classic car restored, and it’s best that you know at least a little about them so you don’t get ripped off, now I’m by no means saying that most shops out there are going to rip you off, but there are a select few shops that make a living pulling little tricks, short cuts and work a rounds, and you don’t want them doing this on your car.

Now first and foremost a restoration shop is not like your local collision repair shop, it’s completely different in every respect, yes a restoration shop does body and paint work, but that is about where the similarities end, a collision repair shop can look at the damage to your car from a collision and give you an estimate with in $100 dollars of the job.

A restoration shop cannot begin to give you an estimate that is even in the ball park, there is no way for them to see every last detail of the restoration on your car, every car is different, some cars are rusted out more then others, parts car be almost impossible to locate for some cars, you don’t just call the local parts store for some of these parts, especially when your talking MOPAR restoration work, there just weren’t a lot of them built in the first place.

Now a shop could tell you something like this when you ask for an estimate, a normal restoration on a car that’s in good shape, with no, or very little rust would take about 800 hours for us to restore, and this would probably be about right, and if the car is in bad shape you could add about 300 hours, this would be pretty close to what it should be, but every shop is a little different, and you have got to know that these estimates are based on time only, parts are added cost, and usually added time.

When a shop tries to give you an estimate, it usually ends up with the car not getting completed, and the owner of the shop, and his customer being very unhappy with each other, and this doesn’t need to happen, this is one reason that my shop doesn’t give estimates on work, unless it’s just something like changing a quarter panel, or door, something simple, on a full restoration we can’t do it, we have tried, and we have had the same problems that I have alluded to earlier.

OK; now that I have finished that little tangent, let’s get down to business, the very first thing is that you love your car, because you’ll be spending a lot of time with it, rather you do the work yourself, or hire a shop to do it for you, either way it will take a lot of time to finish the restoration work, the word restoration itself should be enough to tell you that, most shop are just a man living his dream to restore cars for a living.

Now if you choose to have a shop do the work on your car, make sure that you take a tour of any shop that you are considering to let do the work, during this tour you should look around the shop, look that how clean the shop is, look ate the quality of the equipment and tools that the shop is using, high quality tools and equipment indicate pride in their shop, and in their workmanship, and clean shop shows pride in the shop, and gives you an idea of how they’ll treat your car.

Now look at the work in the shop, look at the other cars, ask the employees what their doing, and why they’re doing it, one of the best answers that you could hear is, I love classic cars, and I think of each car that I restore as my own, if this were my car, how would I want it done, and then I do it that way, or as close as possible with in the budget that we have to work with.

If you decide that you want the work done faster, the shop will put more people on you project, but you have got to realize that these people are working for the shop labor rate, so if the shop has a labor rate of $75.00 per hour, and you have two people working on your car, your not paying $75.00 your paying $125.00 per hour, or shop rate for each employee that’s working on your car, and it is fair, they had to leave another job to help on your car, and their job is now just sitting there waiting for him to get back to it.